![]() Here you can give a name to the ports that you are going to choose, for this you write c:x:name where x is the number of the port and name is the name that you want to give it (it can be several words).In addition to those who already had one connected (those in green) In the list, each port you plugged a device into has the device associated with it.Letter S to choose the ports and build the kext When finished with both devices, letter B to return to the previous menu.When you remove the device, it also disappears from the list but is saved for the next step. ![]() Connect it in each of the ports, whether USB2 or USB3, until you check that it appears in the list of ports.Start with the USB2 device and at the end you repeat with the USB3 (or vice versa).You can also use 2 USB memories, one USB2 and one USB3. I have used a USB3 external disk and 2 cables to connect it to the PC, one of which is USB2 and the other is USB3. ![]() In this phase you need a type 2 USB device and a type 3 USB device. Notice that the ports that have any device connected are in green and the rest are in white. For this reason, it is necessary to generate the map, to define the 15 ports that we are going to have active in macOS and that will be the only ones that we can use. If I use macOS as-is, without port mapping, some will be enabled and some won't, some will probably run at the wrong speed and sleep will almost certainly not work well. Letter D to show all the ports detected by the toolĪlmost all the motherboards that we have in the Hackintosh have more than 15 ports, which is the maximum limit tolerated by macOS. Building a CustoMac Hackintosh: Buyer's Guide
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |